RPI - CANOpen: Difference between revisions
Created page with "== Links == https://www.autopi.io/blog/canopen-simple-introduction-explained/ https://copperhilltech.com/cangineberry-canopen-module-for-raspberry-pi/ https://www.seeedstudio.com/CAN-BUS-FD-HAT-for-Raspberry-Pi-p-4742.html?gad=1&gclid=Cj0KCQjwk96lBhDHARIsAEKO4xYAmLdGQNoTgtlQiTcZrmM7NoMeBFUGK7oMgsC-L3k_4WfpV43_WLYaAnTaEALw_wcB [https://www.autopi.io/blog/raspberry-pi-can-bus-explained/#:~:text=The%20Raspberry%20Pi%20hardware%20does,the%20CAN%20Bus%20(Raspbian). https:/..." |
No edit summary |
||
Line 9: | Line 9: | ||
https://copperhilltech.com/search.php?search_query=pican3&Search= | https://copperhilltech.com/search.php?search_query=pican3&Search= | ||
== Config == | |||
Running a Seeed mcp2518fd based board with 2 can bus. | |||
after boot, should see the following: | |||
<code>pi@raspberrypi:~/projects/can $ dmesg | grep can</code> | |||
<code>[ 11.115212] mcp251xfd spi0.1 can0: MCP2518FD rev0.0 (-RX_INT -PLL -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD o:40.00MHz c:40.00MHz m:20.00MHz rs:17.00MHz es:16.66MHz rf:17.00MHz ef:16.66MHz) successfully initialized.</code> | |||
<code>[ 11.217854] mcp251xfd spi0.0 can1: MCP2518FD rev0.0 (-RX_INT -PLL -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD o:40.00MHz c:40.00MHz m:20.00MHz rs:17.00MHz es:16.66MHz rf:17.00MHz ef:16.66MHz) successfully initialized.</code> |
Revision as of 10:56, 30 November 2023
Links
https://www.autopi.io/blog/canopen-simple-introduction-explained/
https://copperhilltech.com/cangineberry-canopen-module-for-raspberry-pi/
https://copperhilltech.com/search.php?search_query=pican3&Search=
Config
Running a Seeed mcp2518fd based board with 2 can bus.
after boot, should see the following:
pi@raspberrypi:~/projects/can $ dmesg | grep can
[ 11.115212] mcp251xfd spi0.1 can0: MCP2518FD rev0.0 (-RX_INT -PLL -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD o:40.00MHz c:40.00MHz m:20.00MHz rs:17.00MHz es:16.66MHz rf:17.00MHz ef:16.66MHz) successfully initialized.
[ 11.217854] mcp251xfd spi0.0 can1: MCP2518FD rev0.0 (-RX_INT -PLL -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD o:40.00MHz c:40.00MHz m:20.00MHz rs:17.00MHz es:16.66MHz rf:17.00MHz ef:16.66MHz) successfully initialized.