Editing
Pcf8653 driver
Jump to navigation
Jump to search
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
<pre> /* * An I2C driver for the Philips PCF8563 RTC * Copyright 2005-06 Tower Technologies * * Author: Alessandro Zummo <a.zummo@towertech.it> * Maintainers: http://www.nslu2-linux.org/ * * based on the other drivers in this same directory. * * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include <linux/clk-provider.h> #include <linux/i2c.h> #include <linux/bcd.h> #include <linux/rtc.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/of.h> #include <linux/err.h> #define PCF8563_REG_ST1 0x00 /* status */ #define PCF8563_REG_ST2 0x01 #define PCF8563_BIT_AIE (1 << 1) #define PCF8563_BIT_AF (1 << 3) #define PCF8563_BITS_ST2_N (7 << 5) #define PCF8563_REG_SC 0x02 /* datetime */ #define PCF8563_REG_MN 0x03 #define PCF8563_REG_HR 0x04 #define PCF8563_REG_DM 0x05 #define PCF8563_REG_DW 0x06 #define PCF8563_REG_MO 0x07 #define PCF8563_REG_YR 0x08 #define PCF8563_REG_AMN 0x09 /* alarm */ #define PCF8563_REG_CLKO 0x0D /* clock out */ #define PCF8563_REG_CLKO_FE 0x80 /* clock out enabled */ #define PCF8563_REG_CLKO_F_MASK 0x03 /* frequenc mask */ #define PCF8563_REG_CLKO_F_32768HZ 0x00 #define PCF8563_REG_CLKO_F_1024HZ 0x01 #define PCF8563_REG_CLKO_F_32HZ 0x02 #define PCF8563_REG_CLKO_F_1HZ 0x03 #define PCF8563_REG_TMRC 0x0E /* timer control */ #define PCF8563_TMRC_ENABLE BIT(7) #define PCF8563_TMRC_4096 0 #define PCF8563_TMRC_64 1 #define PCF8563_TMRC_1 2 #define PCF8563_TMRC_1_60 3 #define PCF8563_TMRC_MASK 3 #define PCF8563_REG_TMR 0x0F /* timer */ #define PCF8563_SC_LV 0x80 /* low voltage */ #define PCF8563_MO_C 0x80 /* century */ static struct i2c_driver pcf8563_driver; struct pcf8563 { struct rtc_device *rtc; /* * The meaning of MO_C bit varies by the chip type. * From PCF8563 datasheet: this bit is toggled when the years * register overflows from 99 to 00 * 0 indicates the century is 20xx * 1 indicates the century is 19xx * From RTC8564 datasheet: this bit indicates change of * century. When the year digit data overflows from 99 to 00, * this bit is set. By presetting it to 0 while still in the * 20th century, it will be set in year 2000, ... * There seems no reliable way to know how the system use this * bit. So let's do it heuristically, assuming we are live in * 1970...2069. */ int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */ int voltage_low; /* incicates if a low_voltage was detected */ struct i2c_client *client; #ifdef CONFIG_COMMON_CLK struct clk_hw clkout_hw; #endif }; static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg, unsigned char length, unsigned char *buf) { struct i2c_msg msgs[] = { {/* setup read ptr */ .addr = client->addr, .len = 1, .buf = &reg, }, { .addr = client->addr, .flags = I2C_M_RD, .len = length, .buf = buf }, }; if ((i2c_transfer(client->adapter, msgs, 2)) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } return 0; } static int pcf8563_write_block_data(struct i2c_client *client, unsigned char reg, unsigned char length, unsigned char *buf) { int i, err; for (i = 0; i < length; i++) { unsigned char data[2] = { reg + i, buf[i] }; err = i2c_master_send(client, data, sizeof(data)); if (err != sizeof(data)) { dev_err(&client->dev, "%s: err=%d addr=%02x, data=%02x\n", __func__, err, data[0], data[1]); return -EIO; } } return 0; } static int pcf8563_set_alarm_mode(struct i2c_client *client, bool on) { unsigned char buf; int err; err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf); if (err < 0) return err; if (on) buf |= PCF8563_BIT_AIE; else buf &= ~PCF8563_BIT_AIE; buf &= ~(PCF8563_BIT_AF | PCF8563_BITS_ST2_N); err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf); if (err < 0) { dev_err(&client->dev, "%s: write error\n", __func__); return -EIO; } return 0; } static int pcf8563_get_alarm_mode(struct i2c_client *client, unsigned char *en, unsigned char *pen) { unsigned char buf; int err; err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf); if (err) return err; if (en) *en = !!(buf & PCF8563_BIT_AIE); if (pen) *pen = !!(buf & PCF8563_BIT_AF); return 0; } static irqreturn_t pcf8563_irq(int irq, void *dev_id) { struct pcf8563 *pcf8563 = i2c_get_clientdata(dev_id); int err; char pending; err = pcf8563_get_alarm_mode(pcf8563->client, NULL, &pending); if (err) return IRQ_NONE; if (pending) { rtc_update_irq(pcf8563->rtc, 1, RTC_IRQF | RTC_AF); pcf8563_set_alarm_mode(pcf8563->client, 1); return IRQ_HANDLED; } return IRQ_NONE; } /* * In the routines that deal directly with the pcf8563 hardware, we use * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. */ static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm) { struct pcf8563 *pcf8563 = i2c_get_clientdata(client); unsigned char buf[9]; int err; err = pcf8563_read_block_data(client, PCF8563_REG_ST1, 9, buf); if (err) return err; if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) { pcf8563->voltage_low = 1; dev_err(&client->dev, "low voltage detected, date/time is not reliable.\n"); return -EINVAL; } dev_dbg(&client->dev, "%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, " "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", __func__, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], buf[8]); tm->tm_sec = bcd2bin(buf[PCF8563_REG_SC] & 0x7F); tm->tm_min = bcd2bin(buf[PCF8563_REG_MN] & 0x7F); tm->tm_hour = bcd2bin(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */ tm->tm_mday = bcd2bin(buf[PCF8563_REG_DM] & 0x3F); tm->tm_wday = buf[PCF8563_REG_DW] & 0x07; tm->tm_mon = bcd2bin(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ tm->tm_year = bcd2bin(buf[PCF8563_REG_YR]); if (tm->tm_year < 70) tm->tm_year += 100; /* assume we are in 1970...2069 */ /* detect the polarity heuristically. see note above. */ pcf8563->c_polarity = (buf[PCF8563_REG_MO] & PCF8563_MO_C) ? (tm->tm_year >= 100) : (tm->tm_year < 100); dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " "mday=%d, mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); return 0; } static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm) { struct pcf8563 *pcf8563 = i2c_get_clientdata(client); unsigned char buf[9]; dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " "mday=%d, mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); /* hours, minutes and seconds */ buf[PCF8563_REG_SC] = bin2bcd(tm->tm_sec); buf[PCF8563_REG_MN] = bin2bcd(tm->tm_min); buf[PCF8563_REG_HR] = bin2bcd(tm->tm_hour); buf[PCF8563_REG_DM] = bin2bcd(tm->tm_mday); /* month, 1 - 12 */ buf[PCF8563_REG_MO] = bin2bcd(tm->tm_mon + 1); /* year and century */ buf[PCF8563_REG_YR] = bin2bcd(tm->tm_year % 100); if (pcf8563->c_polarity ? (tm->tm_year >= 100) : (tm->tm_year < 100)) buf[PCF8563_REG_MO] |= PCF8563_MO_C; buf[PCF8563_REG_DW] = tm->tm_wday & 0x07; return pcf8563_write_block_data(client, PCF8563_REG_SC, 9 - PCF8563_REG_SC, buf + PCF8563_REG_SC); } #ifdef CONFIG_RTC_INTF_DEV static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { struct pcf8563 *pcf8563 = i2c_get_clientdata(to_i2c_client(dev)); struct rtc_time tm; switch (cmd) { case RTC_VL_READ: if (pcf8563->voltage_low) dev_info(dev, "low voltage detected, date/time is not reliable.\n"); if (copy_to_user((void __user *)arg, &pcf8563->voltage_low, sizeof(int))) return -EFAULT; return 0; case RTC_VL_CLR: /* * Clear the VL bit in the seconds register in case * the time has not been set already (which would * have cleared it). This does not really matter * because of the cached voltage_low value but do it * anyway for consistency. */ if (pcf8563_get_datetime(to_i2c_client(dev), &tm)) pcf8563_set_datetime(to_i2c_client(dev), &tm); /* Clear the cached value. */ pcf8563->voltage_low = 0; return 0; default: return -ENOIOCTLCMD; } } #else #define pcf8563_rtc_ioctl NULL #endif static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm) { return pcf8563_get_datetime(to_i2c_client(dev), tm); } static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm) { return pcf8563_set_datetime(to_i2c_client(dev), tm); } static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm) { struct i2c_client *client = to_i2c_client(dev); unsigned char buf[4]; int err; err = pcf8563_read_block_data(client, PCF8563_REG_AMN, 4, buf); if (err) return err; dev_dbg(&client->dev, "%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n", __func__, buf[0], buf[1], buf[2], buf[3]); tm->time.tm_min = bcd2bin(buf[0] & 0x7F); tm->time.tm_hour = bcd2bin(buf[1] & 0x3F); tm->time.tm_mday = bcd2bin(buf[2] & 0x3F); tm->time.tm_wday = bcd2bin(buf[3] & 0x7); tm->time.tm_mon = -1; tm->time.tm_year = -1; tm->time.tm_yday = -1; tm->time.tm_isdst = -1; err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending); if (err < 0) return err; dev_dbg(&client->dev, "%s: tm is mins=%d, hours=%d, mday=%d, wday=%d," " enabled=%d, pending=%d\n", __func__, tm->time.tm_min, tm->time.tm_hour, tm->time.tm_mday, tm->time.tm_wday, tm->enabled, tm->pending); return 0; } static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm) { struct i2c_client *client = to_i2c_client(dev); unsigned char buf[4]; int err; /* The alarm has no seconds, round up to nearest minute */ if (tm->time.tm_sec) { time64_t alarm_time = rtc_tm_to_time64(&tm->time); alarm_time += 60 - tm->time.tm_sec; rtc_time64_to_tm(alarm_time, &tm->time); } dev_dbg(dev, "%s, min=%d hour=%d wday=%d mday=%d " "enabled=%d pending=%d\n", __func__, tm->time.tm_min, tm->time.tm_hour, tm->time.tm_wday, tm->time.tm_mday, tm->enabled, tm->pending); buf[0] = bin2bcd(tm->time.tm_min); buf[1] = bin2bcd(tm->time.tm_hour); buf[2] = bin2bcd(tm->time.tm_mday); buf[3] = tm->time.tm_wday & 0x07; err = pcf8563_write_block_data(client, PCF8563_REG_AMN, 4, buf); if (err) return err; return pcf8563_set_alarm_mode(client, 1); } static int pcf8563_irq_enable(struct device *dev, unsigned int enabled) { dev_dbg(dev, "%s: en=%d\n", __func__, enabled); return pcf8563_set_alarm_mode(to_i2c_client(dev), !!enabled); } #ifdef CONFIG_COMMON_CLK /* * Handling of the clkout */ #define clkout_hw_to_pcf8563(_hw) container_of(_hw, struct pcf8563, clkout_hw) static int clkout_rates[] = { 32768, 1024, 32, 1, }; static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw); struct i2c_client *client = pcf8563->client; unsigned char buf; int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf); if (ret < 0) return 0; buf &= PCF8563_REG_CLKO_F_MASK; return clkout_rates[ret]; } static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { int i; for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) if (clkout_rates[i] <= rate) return clkout_rates[i]; return 0; } static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw); struct i2c_client *client = pcf8563->client; unsigned char buf; int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf); int i; if (ret < 0) return ret; for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) if (clkout_rates[i] == rate) { buf &= ~PCF8563_REG_CLKO_F_MASK; buf |= i; ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf); return ret; } return -EINVAL; } static int pcf8563_clkout_control(struct clk_hw *hw, bool enable) { struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw); struct i2c_client *client = pcf8563->client; unsigned char buf; int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf); if (ret < 0) return ret; if (enable) buf |= PCF8563_REG_CLKO_FE; else buf &= ~PCF8563_REG_CLKO_FE; ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf); return ret; } static int pcf8563_clkout_prepare(struct clk_hw *hw) { return pcf8563_clkout_control(hw, 1); } static void pcf8563_clkout_unprepare(struct clk_hw *hw) { pcf8563_clkout_control(hw, 0); } static int pcf8563_clkout_is_prepared(struct clk_hw *hw) { struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw); struct i2c_client *client = pcf8563->client; unsigned char buf; int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf); if (ret < 0) return ret; return !!(buf & PCF8563_REG_CLKO_FE); } static const struct clk_ops pcf8563_clkout_ops = { .prepare = pcf8563_clkout_prepare, .unprepare = pcf8563_clkout_unprepare, .is_prepared = pcf8563_clkout_is_prepared, .recalc_rate = pcf8563_clkout_recalc_rate, .round_rate = pcf8563_clkout_round_rate, .set_rate = pcf8563_clkout_set_rate, }; static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563) { struct i2c_client *client = pcf8563->client; struct device_node *node = client->dev.of_node; struct clk *clk; struct clk_init_data init; int ret; unsigned char buf; /* disable the clkout output */ buf = 0; ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf); if (ret < 0) return ERR_PTR(ret); init.name = "pcf8563-clkout"; init.ops = &pcf8563_clkout_ops; init.flags = 0; init.parent_names = NULL; init.num_parents = 0; pcf8563->clkout_hw.init = &init; /* optional override of the clockname */ of_property_read_string(node, "clock-output-names", &init.name); /* register the clock */ clk = devm_clk_register(&client->dev, &pcf8563->clkout_hw); if (!IS_ERR(clk)) of_clk_add_provider(node, of_clk_src_simple_get, clk); return clk; } #endif static const struct rtc_class_ops pcf8563_rtc_ops = { .ioctl = pcf8563_rtc_ioctl, .read_time = pcf8563_rtc_read_time, .set_time = pcf8563_rtc_set_time, .read_alarm = pcf8563_rtc_read_alarm, .set_alarm = pcf8563_rtc_set_alarm, .alarm_irq_enable = pcf8563_irq_enable, }; static int pcf8563_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct pcf8563 *pcf8563; int err; unsigned char buf; unsigned char alm_pending; dev_dbg(&client->dev, "%s\n", __func__); if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) return -ENODEV; pcf8563 = devm_kzalloc(&client->dev, sizeof(struct pcf8563), GFP_KERNEL); if (!pcf8563) return -ENOMEM; i2c_set_clientdata(client, pcf8563); pcf8563->client = client; device_set_wakeup_capable(&client->dev, 1); /* Set timer to lowest frequency to save power (ref Haoyu datasheet) */ buf = PCF8563_TMRC_1_60; err = pcf8563_write_block_data(client, PCF8563_REG_TMRC, 1, &buf); if (err < 0) { dev_err(&client->dev, "%s: write error\n", __func__); return err; } err = pcf8563_get_alarm_mode(client, NULL, &alm_pending); if (err) { dev_err(&client->dev, "%s: read error\n", __func__); return err; } if (alm_pending) pcf8563_set_alarm_mode(client, 0); pcf8563->rtc = devm_rtc_device_register(&client->dev, pcf8563_driver.driver.name, &pcf8563_rtc_ops, THIS_MODULE); if (IS_ERR(pcf8563->rtc)) return PTR_ERR(pcf8563->rtc); if (client->irq > 0) { err = devm_request_threaded_irq(&client->dev, client->irq, NULL, pcf8563_irq, IRQF_SHARED|IRQF_ONESHOT|IRQF_TRIGGER_FALLING, pcf8563->rtc->name, client); if (err) { dev_err(&client->dev, "unable to request IRQ %d\n", client->irq); return err; } } #ifdef CONFIG_COMMON_CLK /* register clk in common clk framework */ pcf8563_clkout_register_clk(pcf8563); #endif /* the pcf8563 alarm only supports a minute accuracy */ pcf8563->rtc->uie_unsupported = 1; return 0; } static const struct i2c_device_id pcf8563_id[] = { { "pcf8563", 0 }, { "rtc8564", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, pcf8563_id); #ifdef CONFIG_OF static const struct of_device_id pcf8563_of_match[] = { { .compatible = "nxp,pcf8563" }, {} }; MODULE_DEVICE_TABLE(of, pcf8563_of_match); #endif static struct i2c_driver pcf8563_driver = { .driver = { .name = "rtc-pcf8563", .of_match_table = of_match_ptr(pcf8563_of_match), }, .probe = pcf8563_probe, .id_table = pcf8563_id, }; module_i2c_driver(pcf8563_driver); MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver"); MODULE_LICENSE("GPL"); </pre>
Summary:
Please note that all contributions to SoftwareGuy may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see
SoftwareGuy:Copyrights
for details).
Do not submit copyrighted work without permission!
Cancel
Editing help
(opens in new window)
Navigation menu
Personal tools
Not logged in
Talk
Contributions
Log in
Namespaces
Page
Discussion
English
Views
Read
Edit
Edit source
View history
More
Search
Navigation
Main page
Recent changes
Random page
Help about MediaWiki
Tools
What links here
Related changes
Special pages
Page information